Air units 2-part Futura model series 2, 3,500 l/min

Version: Self-relieving filter regulator with attached lubricator
Materials: Body: Grivory® (PA 66), spring hood: POM, diaphragms and seals: NBR, container: polycarbonate
Temperature range: to max. +50°C
Input pressure: 1.5 - 16 bar (model series 0: 1.5 - 12 bar)
Condensate draining: semi-automatic**
Pressure gauge connection: G 1/4"
Pore width in the filter: 5 µm
ATEX: II 2G2D -10°C <= Ta <= 50°C (not model series 0 and 4)
Media: Compressed air, neutral gases
Advantages: •automatic venting in the event of overpressure on the secondary side, •simple assembly of single components using coupling kits within a model series, •hand wheel can be stopped by pressing it down and locked with a lock - please use VHS 20, •semi-automatic oil filling by connecting a hose down to the oil bowl (G 1/8"). When the oil fill button is pressed, oil from the container will be sucked through the hose (not model series 0).
Max. condensate amount: 49 cm³
Scope of delivery: Air unit, including 50 mm pressure gauge
Oil metering at 1000 l/min: approx. 1 - 2 drops/min
Oil supply: 80 cm³
Lubricator reaction limit (at 6 bar): 70 l/min
Optional: Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (input pressure 0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si
*standard series, please use in preference, as the regulation range is universally applicable, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight.
Catalogue page Pneumatic Atlas 8 (Page 513) Technical documentation Suitable accessories:

Coupling plugs, NW 7.2 (male thread)

Ball valves with venting, Futura model series

Mounting material for Futura model series

Coupling kit for Futura model series

Replacement bowls for filters and filter regulators - Standard

Push-in fittings with male and female threads, standard

PTFE sealing tape, standard quality

Gaskets made of hard PVC (standard)

Loxeal thread seals

Special oils for pneumatic lubricator

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.